The use of the groove cover plate mold is in accordance with the specific order. The quality of the product will be affected by the groove cover plate mold quality. Therefore, attention should be paid to the processing method and characteristics during the processing, so the quality of the mold is very guaranteed. Generally, there is no standard for the thickness of plastic mold. If a larger product needs to be made, it needs to be thickened, because the concrete raw materials need to be poured into the mold, which will generate certain pressure, but the pressure is proportional to the amount of concrete used, and there is no need to use a lot, so this kind of plastic can be finished. In order to strengthen the compressive capacity of the plastic mold, the extension rib is also designed in the production, which can enhance the compressive capacity of the ditch cover plate mold.
The following factors should be paid attention to during the use of the trench cover plate mold, so as to ensure that the prefabricated block produced is standard and will bring convenience to the project. 1. If the groove cover plate mold is found to have crack before production, or the extension rib is broken, try not to use it temporarily. 2. When grouting, it is necessary to place the trench cover plate mold in a flat environment, and it is not allowed to start processing at will, which will cause damage to the mold. 3. When the ditch cover plate mold vibrates, it shall be ensured that no bubble will appear on the mud surface and then the vibration will be stopped, because the existence of the bubble will lead to the disqualification of the prefabricated block produced.