设为首页    收藏本站

华彩光电首页
      产品列表
预制件塑料模具
光伏墩模具
炕板模具
便道砖模具
井盖模具
压顶模具
挡渣块模具
屋檐板模具
水泥盖板模具
边沟盖板模具
      资质荣誉
      联系我们
保定乐丰盖板模具厂
地址:保定市城东工业区
电话:18803129528
传真:0312-8103818
邮箱:107108222@qq.com
行业新闻

预制盖板模具的每个生产环节都很重要

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

预制盖板模具的使用是为了能够更好的进行预制件的生产,在进行处理的时候,需要注意合理的进行他的操作,并且要保证模具的使用是正确的,不能够随意改动他的使用方法,避免制作出来的盖板预制件是不合格。预制盖板模具,水泥盖板模具,塑料盖板模具所以说在进行生产的时候,需要将模具先进行检查,然后看一些模具的表面是否会出现开裂的问题,之后就需要将合格的模具挑选出来,接下来就是预制盖板模具放置在地面上,远离一些化工原料和机器放置的区域,预制工厂中都有专门的生产区域,可以放心的把模具交付给预制工厂来进行他的生产,之后就是泥浆的搅拌,如果是人工进行材料混合的话,可能会存在材料混合不均匀的问题。

The use of the prefabricated cover plate mold is to better carry out the production of the prefabricated parts. During the processing, it is necessary to pay attention to the reasonable operation, and to ensure that the use of the mold is correct, it is not allowed to change its use method at will, so as to avoid that the prefabricated cover plate is unqualified. So in the process of production, it is necessary to check the mold first, and then check whether the surface of some molds will crack, and then select the qualified molds. Next, the prefabricated cover plate mold is placed on the ground, far away from the areas where some chemical raw materials and machines are placed. There are special production areas in the prefabrication factory, so you can safely put the The mold is delivered to the prefabrication plant for production, followed by mud mixing. If the material is mixed manually, there may be the problem of uneven material mixing.

 预制盖板模具在生产的时候每个环节的操作,必须严格的按照他的使用标准来进行加工的,而且在进行处理的时候,需要注意每个环节的掌控,如果其中一个环节出现问题的话,就会导致后期预制件的生产是不合格,所以说在进行处理的时候,比较重要的就是对于排水槽模具的震动加工。一般的震动方式有两种,一种就是使用手持的振动棒,可以在任何环境中插上电进行他的制作,而且体型小巧方便携带,很多的现浇浇筑的工程都会使用振动棒来进行他的加工,但是像排水槽模具的话,他的质地和钢模具比较起来,还是比较脆弱的,容易受到磨损和伤害,所以说模具会采用的预制的方式来进行他的施工,自然需要使用的就是振动平台来进行他的操作,振动平台比较的笨重,不能够任意的移动,所以说在处理的时候还是使用震动平台来操作比较的方便。平台的震动力度比较的温和,而且能够照顾到预制盖板模具的每个角落,可以让泥浆的振捣更加均匀,让气泡排出的更加干净。

The operation of each link in the production of the prefabricated cover plate mold must be processed in strict accordance with its use standards. During the processing, attention should be paid to the control of each link. If there is a problem in one link, the production of the prefabricated parts in the later stage will be unqualified. Therefore, during the processing, it is more important to Vibration processing of the drain mould. There are two general ways of vibration. One is to use a hand-held vibrator, which can be plugged into any environment to make it, and it is small and portable. Many cast-in-place projects will use the vibrator to process it, but like the drainage channel mold, its texture and steel mold are relatively fragile and vulnerable to wear and tear And injury, so the mold will adopt the prefabricated way to carry out his construction, which naturally requires the use of vibration platform to carry out his operation. The vibration platform is relatively bulky and can not move arbitrarily, so it is more convenient to use the vibration platform to operate when processing. The vibration intensity of the platform is relatively mild, and it can take care of every corner of the prefabricated cover plate mold, which can make the vibration of the mud more uniform, and make the air bubbles discharged more clean.


【上一个】 电缆槽盖板模具的养护方法 【下一个】 水沟盖板模具对孔洞的不同要求


 · 水泥盖板模具的制作方式及储存方式 · 预制盖板模具的每个生产环节都很重要
 · 预制盖板模具成功关键的两点因素 · 水泥盖板模具的优势所在
 · 塑料盖板模具企业的竞争日益激烈 · 塑料盖板模具的诸多优点
 · 水泥盖板模具应该多元化发展 · 塑料盖板模具在冬季的储存注意事项
 · 水泥盖板模具必须把握生产细节 · 塑料盖板模具提高了市场占有率
 · 塑料盖板模具的发展趋势 · 道路建设的支持者——水泥盖板模具

|过滤网片|流水槽钢模具|防撞墙模具|排水沟模具|隔离墩模具|流水槽模具|遮板模具|塑料盖板模具|护坡砖模具|